Roketa mc-13-250 Electrical problems
My Roketa Bali just quit one day. Turn signals worked, horn worked but no starter
So I went down the list you know, fuses, checked switches, shorted the start solenoid and the starter cranked. Then I broke out the volt meter only had about 26 milivolts to the solenoid. I checked connectors as I traced the circuit and always 26 milivolts. Then when I started to unwrapped the wire harnesses and found crimp on splices all along harness. I found a loose wire just touching giving me the 26 milivolts. I also found a loose wire under the fuse box. If you are having electrical problems or, some time on you hands, take a good look at the harness and solder all of the connections and insulate every connection with electrical tape. I hope this helps.
Frank
Last edited by admin : 08-08-2008 at 11:22 AM.
Reason: mor info
|